Driver Hinor - HDT 3169

Driver Hinor - HDT 3169

Titanium drivers are compression drivers of high-quality and efficiency, addressed to the professional public, can be used various places where you want high level acoustics pressure, like P.A systems, return boxes and monitors. Also in fixed places as gymnasia, parks and stadiums.

Este produto foi descontinuado

+ Adicionar a lista de desejos

Product Description

Este produto foi descontinuado

Titanium drivers are compression drivers of high-quality and efficiency, addressed to the professional public, can be used various places where you want high level acoustics pressure, like P.A systems, return boxes and monitors. Also in fixed places as gymnasia, parks and stadiums.

Characteristics:

  • The diaphragm and suspension were extremely light and rigid titanium that provides high sensitivity, even suffering mechanical strenght;
  • Phase plug (acoustic transformer) injected in polycarbonate with openings optimized by software, that reduces the phase cancellation;
  • Magnetic set optimized by software FEM (method of finite elements), that guarantees best geometry and it provides linearity of magnetic flow;
  • Titanium Driver HDT3169 has movable coil manufactured with Cooper Clad wire of rectangular section in form of Kapton. These materials provide high quality, efficiency and resistance to applied power;
  • Model HDT3169 has 50 mm diameter width (2 ”), and it must be connected to same diameter horn;
  • Titanium driver has pressure terminals for direct connection of the cables, and the red one is the positive terminal.

Este produto contém reparo

Technical Specifications

Winding height (mm) 2,5
Gap flow density (T) 1.75
Throat diameter (mm) 75
Diâmetro da Garganta (mm) 50
Diameter x magnet height (mm) 169 x 20
Frequency (Hz@-10 dB) 500 - 20000
Cutting frequency (minimu) 800 Hz (mínima recomendada - 12dB/oitava)
Impedance (Ohms) 8 ohms
Material of Body Coil Kapton
Wire coil material Cooper Clad SV Retangular
Magnet set weight (g) 4.150
Magnet weight (g) 1.690
Power music program 130 W (com crossover 800 Hz/12dB/oitava) 180 W (com crossover 1200 Hz/18dB/oitava) 230 W (com crossover 2000 Hz/18dB/oitava)
Power RMS 65 W (com crossover 800 Hz/12dB/oitava) 90 W (com crossover 1200 Hz/18dB/oitava) 115 W (com crossover 2000 Hz/18dB/oitava)
Volume occupied by Driver 1,5
Horn connection Parafuso no Flange
Fixing holes diameters (mm) 6
Recommended minimum cutoff frequency (12dB/octave) 800
Number of fixing holes 4
Coil hardness (Ohms) 7.0 ohms
SPL (average between 2 and 16Khz) in CHC 14-50 horn, 2.83V @ 1m 109

Downloads

Comentários